Current location： Home >> Products >> Rheological Additive（organoclay）

TY-SD3

Content description:

Sales Hotline:+8613750836416

Product Introduction

TY-SD3

Rheological Additive

----------------------------------------------------------------------------------------------------------------------

TY-SD3 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity.

1. Advantages:

☆ High gelling efficiency over low to medium polarity organic liquids.

☆ Easy of incorporation. No need for polar activator or making pregel.

☆ Consistent in rheology and thixotropy development.

☆ Excellent sag resistance and high viscosity.

☆ Easy of dispersion.

2. Typical Properties:

Color Appearance Density Moisture

(@105℃,2hrs) Fineness through 200 mesh Loss on Ignition

( @1000℃ )

Light Yellow Free Flowing Powder 1.7g/cm3 ≤3.5% ≥98% ≤38%

3. Typical Applications:

●Acrylic paint ●Road paint

●Alkyd paint ●Silica paint

●Anti-corrosion paint ●Solvent epoxy paint

●Bituminous paint ●Nitro lacquer

●Chlorinated rubber paint ●Inks(Mineral oil)

●Marine paint ●Inks(Nitro)

●Non-solvent epoxy paint ●Lubricating grease

●Polyester paint ●Adhesive

●Primer paint

4. Incorporations:

TY-SD3 belongs to the unconventional type of organoclays group, being an easy-to-disperse, self-activated organoclay, TY-SD3 does not require a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.

5. Recommended Levels:

The amount of TY-SD3 rheological additive required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.2%-2.0% based on the total formulation weight.

6. International Countertypes: Bentone®SD-3, Claytone®AF

Cases